Pay attention to the use of cables
Release time:
2024-06-19
When selecting and using cables, several aspects need to be considered to ensure safety and efficiency. First of all, the selection of appropriate cable products on the basis of use, setting conditions and safety is closely related to various sectors of the national economy. Secondly, when installing the heat pipe and the cable at the same time, it is necessary to maintain a proper distance, at least 50cm cross. In addition, when installing directly, the industrial cable must be at a depth of at least 70cm. When installing the cable console, the semiconductor protection must be removed to avoid damage to the cable insulation.
When selecting and using cables, several aspects need to be considered to ensure safety and efficiency. First of all, the selection of appropriate cable products on the basis of use, setting conditions and safety is closely related to various sectors of the national economy. Secondly, when installing the heat pipe and the cable at the same time, it is necessary to maintain a proper distance, at least 50cm cross. In addition, industrial cables must be at a depth of at least 70cm when installed directly, and the semiconductor protection must be removed when installing the cable console to avoid damage to the cable insulation.
Cable failure types include mechanical damage, insulation damage, twitching, aging, deformation, overvoltage and overheating. If a failure occurs, the power should be turned off first, the damage point should be determined, inspection and analysis should be performed, and then restored. Therefore, when using cables, it is very important to regularly check and maintain the cables to prevent possible failures and accidents.
Recent News
2024-06-19
A cable is an important electrical device consisting of many wires isolated from each other, with insulating and protective skins. The main purpose of the cable is telecommunications or power supply and can be installed in the air or underwater.
2024-06-19
Protect the cable from damage: The protective coating of the cable is located on the outside of the cable insulator, and its main purpose is to protect the inner layer of the cable from mechanical damage and chemical corrosion. This helps to extend the life of the cable and ensure its stable operation under various conditions. By increasing the mechanical strength: By increasing the mechanical strength of the cable, the protective coating can increase the elasticity of the cable. This is necessary to ensure that the cable can withstand external forces during transmission to avoid damage caused by external forces.
Classification and application of cable
2024-06-19
The classification of cables and their applications are very extensive, involving many fields, such as electrical systems and information transmission systems. According to the application, cables can be divided into bare wire, insulation, heat insulation, shielding, electrical, controllable, cable, radio frequency, etc. Cables are mainly used in power grids, including overhead wires, wires (buses), power cables, branch cables,
Focus on cable line construction and business concerns
2024-06-19
The construction and operation of cable lines is an important part of power supply, and its quality and safety directly affect the reliability of the power supply system. Before cable construction, technical measures in line with the actual operation of the site shall be studied and formulated in detail, and shall not be changed without authorization. In addition, the quality of cable construction is not only related to itself, but also related to its quality. Therefore, in the construction of cable lines, relevant regulations must be strictly observed to ensure the quality of work.